|
Heavy Duty Accu-Slice System
The Heavy Duty Accu-Slice System is an upgrade from our standard Accu-Slice System designed for the professional Luthier, woodworker or commercial business customer. The Heavy Duty Accu-Slice system extents and capabilities of our standard Accu-Slice System. The Heavy Duty Accu-Slice system table is larger, heavier, has larger guide bars and linear bearings and is more stable than our standard Accu-Slice system. It also incorporates 4 adjustable legs to minimize or eliminate friction between the index table and the band saw table. This enables the more accurate slicing of longer and heavier boards as compared to our standard Accu-Slice system. This system was developed during the design of the new Automated Accu-Slice System and incorporates many of the features of that system. Two Models now available. The first model uses a 3/4" x 3/8" miter bar which fits most band saws sold in the US. The second model is designed for the Hammer Models N3800 and N4400 band saws with a 15 mm wide miter bar. NOTE: These units are custom machined and assembled in our shops based on the users' requirements. Normally delivery time is 4 to 6 weeks after you place an order. |
Heavy Duty Accu-Slice Ordering ProcessThe Heavy Duty Accu-Slice System can either be ordered as a complete system or you can assemble a package of components to suit your personal requirements.
For additional details and ordering information click on the link above to go to the main Heavy Duty Accu-Slice web page. |
|
|
|
|
This video will fully describe the Heavy Duty Accu-Slice System. Here is an outline of the contents of this video.
|
|
|
Heavy Duty Accu-Slice System for the Hammer Band Saws
This video describes the Heavy Duty Accu-Slice System for use with the Hammer models N3800 and N4400 band saws with a 15 mm wide by 6.3 mm deep miter bar.
|
Band Saw System Requirements
* The band saw table must be cast iron so that the MagJig magnets will clamp the Accu-slice table to the band saw table.
* The Band Saw Table must be at least 14” wide and not exceed 34” wide
* The current Model of the Heavy Duty Accu-slice system requires a band saw table with a ¾” wide miter bar slot.
An additional version for the Hammer band saw with a 15mm miter bar slot is also available. Other sizes may be available.
* The distance between the front edge of the miter bar slot on the band saw and the band saw blade must not exceed 5”. The current model will not fit band saws such as the Rikon band saw on which this distance is 6”. A larger Heavy Duty Accu-Slice Index table may be available in the future which would fit this model of band saw.
* The band saw table must be cast iron so that the MagJig magnets will clamp the Accu-slice table to the band saw table.
* The Band Saw Table must be at least 14” wide and not exceed 34” wide
* The current Model of the Heavy Duty Accu-slice system requires a band saw table with a ¾” wide miter bar slot.
An additional version for the Hammer band saw with a 15mm miter bar slot is also available. Other sizes may be available.
* The distance between the front edge of the miter bar slot on the band saw and the band saw blade must not exceed 5”. The current model will not fit band saws such as the Rikon band saw on which this distance is 6”. A larger Heavy Duty Accu-Slice Index table may be available in the future which would fit this model of band saw.