GlueJig System - AS700
GlueJig Kit - AS715
- 2 – 2” x 2” x 35” long aluminum angle irons
- 5 – 2.5” x 12” long slotted aluminum rails
- 1 – 12” x 35” x ¾” MDF mounting board
- 2 – Brass T Slot Guides with clamps
- Mounting screws (clamps are not included)
GlueJig Kit - AS715
- User Assembly Required
- 2 – 2” x 2” x 35” long aluminum angle irons
- 5 – 2.5” x 12” long slotted aluminum rails
- 2 – Brass T Slot Guides with clamps
- All the Assembly Screws, Brass keys and Thumb Screws for user assembly
- Does not include the MDF Board
GlueJig System - AS700
The “GlueJig” was developed for gluing together thin strips of wood that were cut with the Accu-Slice System. These glued strips are used for feature strips in woodturning projects as well as the laminated boards for the “Dizzy” bowl projects.
The “GlueJig” consists of two aluminum angle irons (2” x 2” x 35”), five slotted aluminum rails (2.5” x 12”) and an MDF mounting board (12” x 35”). The back angle iron is mounted to the rails with screws and the front angle iron slides on the rails via two or more 2” long brass T slot guides with clamps. These guides prevent the angle iron from tilting up when the clamps are applied.
After glue has been applied to the wood strips, they are placed into the “GlueJig” in a cradle of wax paper so the system is kept clean. The glued strips are then clamped using either spring clamps, C-Clamps or parallel clamps (clamps are not included with the “GlueJig).
The “GlueJig” was developed for gluing together thin strips of wood that were cut with the Accu-Slice System. These glued strips are used for feature strips in woodturning projects as well as the laminated boards for the “Dizzy” bowl projects.
The “GlueJig” consists of two aluminum angle irons (2” x 2” x 35”), five slotted aluminum rails (2.5” x 12”) and an MDF mounting board (12” x 35”). The back angle iron is mounted to the rails with screws and the front angle iron slides on the rails via two or more 2” long brass T slot guides with clamps. These guides prevent the angle iron from tilting up when the clamps are applied.
After glue has been applied to the wood strips, they are placed into the “GlueJig” in a cradle of wax paper so the system is kept clean. The glued strips are then clamped using either spring clamps, C-Clamps or parallel clamps (clamps are not included with the “GlueJig).
GlueJig Kit - AS715
This kit includes all the components (with the exception of the MDF Board) for the user to produce their own version of the GlueJig System. Since the MDF board is not included and the parts are not assembled this system is less expensive to manufacture and ship. As a result we pass these savings along to our customers. The Glue Jig Kit includes the following:
This kit includes all the components (with the exception of the MDF Board) for the user to produce their own version of the GlueJig System. Since the MDF board is not included and the parts are not assembled this system is less expensive to manufacture and ship. As a result we pass these savings along to our customers. The Glue Jig Kit includes the following:
- Five - 12" rails
- Two - 35" long Aluminum Angle Irons, 2" x 2" with predrilled mounting holes.
- Hardware package - contains all the scews needed for assembly
- Two Brass Keys with two thumb screws
- Does not include the MDF Board
|
|
Assembling the GlueJig Kit
This video describes the assembly of the GlueJig kit to produce a completely assembled GlueJig system. |
|
|
GlueJig - A System for Gluing and Clamping Veneers and Thin Wood Strips to produce Laminated Boards.
|
|
|
This video describes the assembly of the Glue Jig System. |
|
|
This is an updated video on the assembly of the GlueJig kits.
|
Videos demonstrating the use of the Glue Jig System
|
|
|
|
|
|